How To Install A New Windscreen For Your Porsche Car

Today, we’re going to talk about how to install a new windscreen for your Porsche car. The windscreen is an important component of your car, providing protection from the elements and keeping you safe on the road. If your windscreen is damaged or cracked, it’s important to replace it as soon as possible. In this article, we’ll discuss how to install a new windscreen for your Porsche car.

What You’ll Need

Before we begin, let’s go over the tools and supplies you’ll need:

  • New windscreen
  • Windscreen adhesive
  • Windscreen sealant
  • Razor blade
  • Gloves
  • Clean cloth

Step 1: Removing the Old Windscreen

First, remove the old windscreen from your Porsche. This can be done by carefully cutting the adhesive around the edges of the windscreen with a razor blade. Be sure to wear gloves to protect your hands from any sharp edges or broken glass.

Step 2: Preparing the New Windscreen

Next, clean the area around the windscreen frame thoroughly with a clean cloth to remove any dirt or debris. Then, apply a layer of windscreen sealant around the edges of the frame to ensure a proper seal.

Step 3: Installing the New Windscreen

Now it’s time to install the new windscreen. Apply a layer of windscreen adhesive around the edges of the windscreen frame, being careful not to apply too much. Then, carefully place the new windscreen into the frame, making sure it’s properly aligned.

Step 4: Securing the Windscreen

Once the new windscreen is in place, use a piece of clean cloth to firmly press the edges of the windscreen into the adhesive. This will help ensure a secure bond between the windscreen and the frame. Be sure to remove any excess adhesive with a razor blade.

Step 5: Allowing the Adhesive to Dry

After the windscreen is securely in place, allow the adhesive to dry completely. This can take anywhere from a few hours to a full day, depending on the type of adhesive you’re using. Be sure to check the manufacturer’s instructions for specific drying times.

Step 6: Testing the Windscreen

Once the adhesive is fully dry, it’s important to test the windscreen to make sure it’s properly installed. This can be done by gently tapping on the edges of the windscreen to ensure it’s secure. You can also spray water on the windscreen to check for any leaks.

Installing a new windscreen for your Porsche car is an important task that should be done carefully and correctly. With the right tools and knowledge, it’s a fairly straightforward process that can be done at home. Just be sure to follow the steps carefully and take your time. Thanks for tuning in, folks, and we’ll see you next time!

 

"
Porsche Princeton 40.2949476, -74.6829876.